| FORMAT SPRAY PAİNTS |
 |
FORMAT SPRAY PAİNT 400 ML
| Code No : |
F400 |
| Qty in a Box : |
20 |
| Box Weight : |
7700 gr |
| Box Dimensions: |
21 *27 *33,5 cm |
|
|
 |
FORMAT SPRAY PAINT 300 ML
| Code No : |
F300 |
| Qty in a Box : |
24 |
| Box Weight : |
6820 gr |
| Box Dimensions: |
20,5 *24 *35,5 cm |
|
|
 |
FORMAT SPRAY PAİNT 230 ML
| Code No : |
F230 |
| Qty in a Box : |
30 |
| Box Weight : |
6170 gr |
| Box Dimensions: |
20 *27 *32 cm |
|
|
|
|
| |
|
 |
Can bu safely used for repair or restoration purposes
on almost any kind of metal and wooden surfaces, such
as automobiles, bus, tracks, tractors, any kinds of motorbikes
and bicycles, refrigerators, wash machines, dish machines,
heavy-duty machinery and agricultural machinery, table,
chair, cabinet, door, and boat. |
| |
|
| |
DIRECTIONS FOR USE |
|
Clean dirt, corrosion, water and grease on the application
surface before use. Thoroughly shake the spray for 3 minutes
before applying. Spray the paint at 20°C with leaving
20 cm distances from the application surface. Apply several
coats with thin layers. After finishing the painting turn
the can upside down and press the clack (for about 3 sec)
until clean gas is discharged. Otherwise, paint residue
on the clack would block the clack, and it become impossible
to use the spray second time. It is better to lay down
the surface to be painted during painting. The paint will
dry off almost in 5-10 minutes. |
| |
|
| |
INGREDIENTS |
|
Pigment, Solvent, LPG |
|
|
| |
| FORMAT SPRAY LACQUERS |
 |
FORMAT SPREY LACQUER 400 ML
| Code No : |
FV400 |
| Qty in a Box : |
20 |
| Box Weight : |
7700 gr |
| Box Dimensions: |
21 *27 *33,5 cm |
|
|
 |
FORMAT SPREY LACQUER 200 ML
| Code No : |
FV300 |
| Qty in a Box : |
24 |
| Box Weight : |
6820 gr |
| Box Dimensions: |
20,5 *24 *35,5 cm |
|
|
 |
FORMAT SPREY LACQUER 230 ML
| Code No : |
FV230 |
| Qty in a Box : |
30 |
| Box Weight : |
6170 gr |
| Box Dimensions: |
20 *27 *32 cm |
|
|
|
|
| |
|
|
You can use this Spray Lacquer for restoration and finishing
on table tops, furniture, chairs, cabinets, wooden frame
door, window frames, coffee tables, parquets, and sea
vehicles. You can use it to restore bare wooden surfaces
exposed to wear and moisture and when conditions cause
blushing. With this lacquer spray you can restore and
finish your surfaces with extra color, shine and mate
depth. |
| |
|
| |
DIRECTIONS FOR USE |
|
Clean dirt, corrosion, water and grease on the application
surface before use. Thoroughly shake the lacquer spray
for 3 minutes before applying. Apply the lacquer coat
at 20°C with leaving 20 cm distances from the application
surface. Apply several coats with thin layers. After finishing
lacquering turn the can upside down and press the clack
(for about 3 sec) until clean gas is discharged. Otherwise,
lacquer residue on the clack would block the clack, and
it become impossible to use the spray second time. It
is better to lay down the surface to be lacquered when
applying. The lacquer will dry off almost in 5-10 minutes. |
| |
|
| |
INGREDIENTS |
|
Pigment, Solvent, LPG |
|
|
|
|
