| AYK SPRAY PAİNTS |
 |
AYK SPRAY PAINT 200 ML
| Code No : |
A200 |
| Qty in a Box : |
30 |
| Box Weight : |
5800 gr |
| Box Dimensions: |
20 *27 *32 cm |
|
|
 |
AYK SPRAY PAINT 250 ML
| Code No : |
A250 |
| Qty in a Box : |
24 |
| Box Weight : |
5880 gr |
| Box Dimensions: |
20,5 *24 *35,5 cm |
|
|
| |
|
|
| |
|
 |
You can use this Spray Lacquer for restoration and finishing
on table tops, furniture, chairs, cabinets, wooden frame
door, window frames, coffee tables, parquets, and sea
vehicles. You can use it to restore bare wooden surfaces
exposed to wear and moisture and when conditions cause
blushing. With this lacquer spray you can restore and
finish your surfaces with extra color, shine and mate
depth. |
| |
|
| |
DIRECTIONS FOR USE |
|
Clean dirt, corrosion, water and grease on the application
surface before use. Thoroughly shake the lacquer spray
for 3 minutes before applying. Apply the lacquer coat
at 20°C with leaving 20 cm distances from the application
surface. Apply several coats with thin layers. After finishing
lacquering turn the can upside down and press the clack
(for about 3 sec) until clean gas is discharged. Otherwise,
lacquer residue on the clack would block the clack, and
it become impossible to use the spray second time. It
is better to lay down the surface to be lacquered when
applying. The lacquer will dry off almost in 5-10 minutes. |
| |
|
| |
INGREDIENTS |
|
Pigment, Solvent, LPG |
|
|
| |
| AYK SPRAY LACQUERS |
 |
AYK SPREY LACQUER 200 ML
| Code No : |
AV200 |
| Qty in a Box : |
30 |
| Box Weight : |
5800 gr |
| Box Dimensions: |
20 *27 *32 cm |
|
|
 |
AYK SPREY LACQUER 250 ML
| Code No : |
AV250 |
| Qty in a Box : |
24 |
| Box Weight : |
5880 gr |
| Box Dimensions: |
20,5 *24 *35,5 cm |
|
|
| |
|
|
| |
|
|
You can use this Spray Lacquer for restoration and finishing
on table tops, furniture, chairs, cabinets, wooden frame
door, window frames, coffee tables, parquets, and sea
vehicles. You can use it to restore bare wooden surfaces
exposed to wear and moisture and when conditions cause
blushing. With this lacquer spray you can restore and
finish your surfaces with extra color, shine and mate
depth. |
| |
|
| |
DIRECTIONS FOR USE |
|
Clean dirt, corrosion, water and grease on the application
surface before use. Thoroughly shake the lacquer spray
for 3 minutes before applying. Apply the lacquer coat
at 20°C with leaving 20 cm distances from the application
surface. Apply several coats with thin layers. After finishing
lacquering turn the can upside down and press the clack
(for about 3 sec) until clean gas is discharged. Otherwise,
lacquer residue on the clack would block the clack, and
it become impossible to use the spray second time. It
is better to lay down the surface to be lacquered when
applying. The lacquer will dry off almost in 5-10 minutes. |
| |
|
| |
INGREDIENTS |
|
Pigment, Solvent, LPG |
|
|
|
|
